Adaptor: ABS Pins: Golden plated brass pins, 2pins,
Connector house: ABS
Products are widely used in communications, medical, laser, automotive, surveying, mapping, military and other equipment.
Plastic housing made of PSU, light weight
Tail nuts and socket round nuts are color-coded to prevent mis-insertion
Multiple colors to choose from (gray, blue, yellow, black, red, green and white) Positioning device: Double reed lock, keyway to prevent rotation
Mechanical life: 3000-5000 cycles
Waterproof IP rating: IP50
Salt spray corrosion test: >48h
Ruggedness: Suitable for use under high vibration and strong impact conditions.
1. Pass the cable through the tail nut① and the cable clamp②. Solder to the corresponding position of the insulator assembly③.
2. Install the cable clamp② to the welded insulator assembly③. Note that the protrusion of the cable clamp② corresponds to the groove of the insulator③.
3. Insert the insulator assembly③ into the plug assembly④, noting that the protrusions on the cable② are to fit in the recesses in the plug assembly④.
4. Install the tail nut 1 into the plug assembly④ and tighten the tail nut.